OEM for professional installation only!
The Combi 2 E LPG heater is a warm air heater with an integrated hot water boiler. The appliance also has heating elements for electrical operation.
In heating mode the heater can be used to heat both the vehicle and water simultaneously. Or if hot water alone is required the hot water mode can be selected.
The lightweight combination heater runs in gas mode for self-sufficient use in electrical mode for stationary use and in mixed mode when outside temperatures are low.
A 10-litre stainless steel water tank is integrated into the system which is jointly heated in winter. In summer mode the user can heat the water independently of the heater. The water then reaches a temperature of 60 degrees in about 20 minutes.
With the Truma App the user can switch their Combi heater on from a smartphone.
• Heating Mode
In Heating Mode the appliance automatically selects the required operating level according to the temperature difference between the temperature set on the control panel and the current room temperature.
If the water container has been filled the water is automatically heated as well. The water temperature depends on the selected operating mode and the heater output.
Energy selection options:
- Gas mode: In this mode the appliance automatically selects the operating level that is required.
- Electric mode: In this mode an output of 980 W (3.9 A) or 1960 W (7.8 A) can be manually preselected in accordance with the fuse protection at a campsite.
OEM for professional installation only!
The Truma Combi 2E kit includes the Truma CP+ digital control panel. The CP+ control panel is also iNet ready. The Truma iNet system enables control of your Combi 2E from your tablet or mobile phone via an app. Additionally, if you have a Truma air-conditioning unit installed, the control panel can automatically co-ordinate the heater and air conditioning unit to ensure your living space maintains a comfortable and controlled environment.
· Heater model: Truma Combi 2E
· Dimensions (L x W x H): 510 x 450 x 300 mm
· Installation dimensions (L x W x H): 540 x 500 x 350mm**
· Weight (when empty of water): 15.1kg
· Heating time (from 15°C to 60°C) (Water only): Approx. 20min.
· Heating time (from 15°C to 60°C) (Heater + Water): Approx. 80min.
· Rated thermal output (Electric): 980 W / 1960 W
· Rated thermal output (Gas): max. 1950 W
· Rated thermal output (Electric & Gas Combined): 3900 W
· Fuel consumption (Gas): 130 g/h
· Water capacity: 10 litres
· Air flow rate: Max. 287 m3/h
· Power consumption (at 230V): 3.9A / 7.8A
· Power consumption (at 12V): Heating up boiler 0.2A up to temporary max. of 5.6A (average approx. 1.1A)
· Water pressure: MAX 2.8 Bar
Heater (excluding exhaust duct) comes complete with room thermostat, control panel with 3 m cable, mounting parts and elbow fittings for 10mm Ø water hoses. Models with water connections for semi-rigid piping (John Guest System) available on request.
Item No. 33113-80/GPSP
Gas type: LPG Propane / Butane