Upgraded Charger For New Lithium Batteries
The Cb522-Lt Features Overheating Protection, Plus The 12V Outputs Are Protected Against Short Circuits And Polarity Inversion.
Automatic Charging System Takes Place In Four Phases.
· Phase 1: Bulk – The Battery Is Charged With Maximum Current Until The End-Of-Charge Voltage Is Reached.
· Phase 2: Absorption – Battery Charging Is Completed With Constant End-Of-Charge Voltage For A Maximum Time Of 1H (Or 30 Minutes With I≪5A).
· Phase 3: Float – Maintenance Charging At A Constant Voltage Of 13.5V For A Maximum Time Of 240 Hours. The Cycle Is Resumed From The Bulk Phase If Battery Voltage Drops Below 12.7V After A High Load Has Been Switched On.
· Phase 4: Refresh – The Battery Is Charged To The Voltage Of 14.5V For A Maximum Time Of 30 Minutes (Or Up To I≪5A). Afterwards, The Charge Restarts From The Float Phase.
*Input Technical Data
• Rated Voltage; 230V ~ ±10%
• Frequency; 50÷60 Hz
• Max. Power; 320 W
• Protection Fuse; T 3.15A (Glass 5×20)
• Safety Switch; 230V ~ Luminous
*Output Technical Data
• Bulk Voltage; 14,5V
• Float Voltage; 13,5V
• Maximum Output Current; 22A
• Charging Line; Iuou
• Short Circuit And Polarityinversion Protection; 30A (Car Type)
• Thermal Protection; Yes
• Signal Ac Power Supply (S); 12V; 50 Ma
*General Technical Data
• Efficiency; 86%
• Room Temperature; 0 – +40 °C
• Ventilation; Gradual Automatic Regulation
• Low Voltage Directive; 2014/35/Ue
• Emc Directive; 2014/30/Ue
• Connection To Network; 3-Pole “Mate-N-Lock” Connector / Schuko Plug
• Connection To Battery; Screw M6
• Network Signal Connection; Faston Type 6,3
• Temperature Sensor; Yes, Included
• Dimensions; 180 X 190 X 85 (Mm)
• Weight; 1,2Kg